High capacity and cycling stability of poly(diaminoanthraquinone) as an organic cathode for rechargeable lithium batteries

Poly(1,5‐diaminoanthraquinone) is synthesized by oxidative polymerization of diaminoanthraquinone monomers and investigated as an organic host for Li‐storage reaction. Benefiting from its high density of redox‐active, Li⁺‐associable benzoquinone groups attached to conducting polyaniline backbones, this polymer undergoes its cathodic reaction predominately through Li⁺‐insertion/extraction processes, delivering a very high reversible capacity of 285 mAh g^?1. In addition, the PDAQ polymer cathode exhibits an excellent rate capability (125 mAh g^?1 at 800 mA g^?1) and a considerable cyclability with a capacity retention of ～160 mAh g^?1 over 200 cycles, possibly serving as a sustainable, high capacity Li⁺ host cathode for Li‐ion batteries. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 235–238     

Structural and Functional Implications of the Interaction between Macrolide Antibiotics and Bile Acids

Macrolide antibiotics, such as azithromycin and erythromycin, are in widespread use for the treatment of bacterial infections. Macrolides are taken up and excreted mainly by bile. Additionally, they have been implicated in biliary system diseases and to modify the excretion of other drugs through bile. Despite mounting evidence for the interplay between macrolide antibiotics and bile acids, the molecular details of this interaction remain unknown. Herein, we show by NMR measurements that macrolides directly bind to bile acid micelles. The topology of this interaction has been determined by solvent paramagnetic relaxation enhancements (solvent PREs). The macrolides were found to be bound close to the surface of the micelle. Increasing hydrophobicity of both the macrolide and the bile acid strengthen this interaction. Both bile acid and macrolide molecules show similar solvent PREs across their whole structures, indicating that there are no preferred orientations of them in the bile micelle aggregates. The binding to bile aggregates does not impede macrolide antibiotics from targeting bacteria. In fact, the toxicity of azithromycin towards enterotoxic E. coli (ETEC) is even slightly increased in the presence of bile, as was shown by effective concentration (EC₅₀) values.     

病原微生物感染的蛋白质组学研究

基于质谱的蛋白质组学在近20年有巨大的发展。在其应用中,病原微生物和与感染相关的蛋白质组学具有重要科学意义,体系复杂度又相对较小,一直受到广泛关注并有较快发展。本文从感染中病原微生物和宿主的蛋白质组学两方面入手,简要综述应用蛋白质组学研究感染过程的相关工作,着重介绍该领域近几年的主要进展,并对其发展做出展望。     

二种求算晶体平面间距d_(hkl)的数学方法

用数学方法推导出结构化学晶体学中晶面间距的一般通式,并在此基础上推导出其他晶系的晶面间距(d(hkl))的计算表达式。     

共沸点存在的充分条件

以纯液体蒸气压和亨利系数为出发点,讨论了二组分气液相图存在共沸点的充分条件。结合纯液体蒸气压和亨利系数的物理意义,对共沸点存在的条件进行了说明。     

Li3V2（PO4）3/C正极材料在不同电压区间的电化学行为及容量衰减原因

采用溶胶-凝胶法制备锂离子电池正极材料Li3V2(PO4)3/C.通过恒电流充放电测试、循环伏安(CV)、电化学阻抗谱(EIS)等方法,研究了Li3V2(PO4)3/C在不同电压区间的电化学行为(3.0-4.5 V和3.0-4.8 V).结果表明,3.0-4.8 V电压区间的循环性能和倍率性能均不及3.0-4.5 V电压区间的.3.0-4.5 V区间0.1C (1C=150 mA?g-1)倍率首次放电比容量为127.0 mAh?g-1,循环50次后容量保持率为99.5%,而3.0-4.8 V区间的分别为168.2 mAh?g-1和78.5%.经过高倍率测试后再回到0.1C倍率充放电,3.0-4.5 V和3.0-4.8 V的放电比容量分别为初始0.1C倍率的99.0%和80.7%.经过3.0-4.8 V电压区间测试后,少部分第三个锂离子能够在低于4.5 V的电压脱出,使3.0-4.5 V电压区间的放电比容量提升了7.4%. CV结果表明3.0-4.8 V区间的容量损失主要表现为第一个锂离子的不可逆损失.极片的X射线衍射(XRD)和X射线光电子能谱(XPS)分析测试结果表明经过3.0-4.8 V测试后, Li3V2(PO4)3的结构发生了轻微的改变.电感耦合等离子体(ICP)测试结果表明循环后的电解液中含有少量的V.结构变形和V溶解可能是Li3V2(PO4)3在3.0-4.8 V区间容量衰减的主要原因.     

α-四(对磺酸钠苯氧基)酞菁锌(钴,镍)光敏剂的光动力性质研究

采用UV-Vis光谱、红外吸收光谱、CHN元素分析及激光解析飞行时间质谱对α-四(对磺酸钠苯氧基)酞菁锌(钴,镍)[α-PhSPcZn(Co,Ni)]进行表征.在光诱导条件下,采用四甲基偶氮唑蓝比色法(MTT法),考察了光敏剂的中心原子、浓度和光照时间等条件下对癌细胞的抑制作用.结果显示,光照15min、浓度为0~100mg·L-1范围内时,α-PhSPcZn的抑瘤率高于α-PhSPcCo和α-PhSPcNi.抑瘤率均随光照时间和配合物浓度的增加而升高,α-PhSPcZn的抑制率可达54%,其IC50值为75mg·L-1.     

以3,5-二硝基苯甲酸和吡唑为配体的Ni(Ⅱ),Co(Ⅱ)配合物的合成与晶体结构

以3,5-二硝基苯甲酸(3,5-Hdnbc)和吡唑(pz)为配体与Co2+和Ni 2+反应,得到了2个新的配合物[Co(3,5-dnbc)2(pz)2(H2O)2](1)和[Ni(3,5-dnbc)2(pz)4](2).用元素分析、红外光谱对其进行了表征,并用单晶X-射线衍射测定了配合物的晶体结构;配合物1和2均为单核分子,配合物1通过分子内和分子间氢键形成三维网络超分子结构,而配合物2中只存在分子内氢键.